The term petrochemical products includes any aromatic, olefin, and synthesis gas, and any of their derivatives, including ethylene, propylene, butadiene, benzene, toluene, xylene, ammonia, methanol, and urea.
Petrochemicals can be defined as a large group of chemicals derived from natural gas and petroleum and further used for a variety of chemical purposes, which are extremely important in modern civilization.
UREA ( Nitrogen 46%)
Solid urea is the largest nitrogen fertilizer product which is produced in two forms of granules and prills. Although the chemical properties of both prills and granules remain similar, their different physical and mechanical properties are distinguishable and make them suitable for different application either as fertilizer or raw materialsfor chemical industry.
LAB (LINEAR ALKYL BENZENE)
LAB is precursor of detergents. This product at first reacts with SO3 gas to produce LABSA (Linear Alkyl Benzene Sulphonic Acid), then it is being used as a surfactant agent in detergent production.
HAB(HEAVY ALKYLATE)
Heavy Alkylate(also called Heavy Alkyl Benzene) is a byproduct of LAB and it is being formed during alkylation process. It’s use are is all kinds of industrial oils, such as, transformator oil, hydraulic fluids and lubricating greases.
LABSA (LINEAR ALKYL BENZENE SULPHONIC ACID)
LABSA is produced by the sulphonation reaction of Linear Alkyl Benzene with Sulphur (SO3). LABSA is one of the major active ingredients for the production of soaps and detergents. Importantly, it forms a greater percentage of raw materials for the production of liquid soaps.
VAM (VINYL ACETATE MONOMER)
Vinyl acetate monomer, or VAM, is a colorless monomer which has a strong odor. It is precessor for polyvinyl acetate which is an important polymer in industry. It is an important raw material for many industrial products. It can go into many reactions which are expected for an alkene and ester.
MEG (MONO ETHYLENE GLYCOL)
Mono-ethylene glycol – or MEG – is a vital ingredient for the production of polyester fibres and film, polyethylene terephthalate (PET) resins and engine coolants. End uses for MEG range from clothing and other textiles, through packaging to kitchenware, engine coolants and antifreeze.
DEG (DI ETHYLENE GLYCOL)
Diethylene glycol (DEG) is an organic compound. It is a colorless, practically odorless and poisonous liquid. It is commonly used in the commercial preparation of antifreeze, brake fluid, cigarettes, and some dyes. It is an excellent solvent for many relatively insoluble substances.
TEG (TRI ETHYLENE GLYCOL)
Triethylene glycol is a chemical compound that is categorized as an alcohol. At room temperature it is a liquid. It is clear, has a mild odor and is not extremely viscous. Triethylene glycol is soluble in water.
ETHANOLAMINES
Diethanolamine (DEA) and triethanolamine (TEA) are key examples of ethanolamines alongside monoethanolamine (MEA)—a chemical group comprised of amino acids (the building blocks of proteins) and alcohols. They are used in a wide range of applications including cosmetics and personal care products.
MTBE (METHYL TERTIARY BUTYL ETHER)
Methyl Tertiary Butyl Ether is an organic compound and it is the family of saturated aliphatic ether. It acts as octane enhancer of gasoline and has the advantage of more complete combustion of fuel and as a result, a significant reduction in exhaust emissions of cars. In some cases, as solver of gallstone was used for medical purposes.
PBR (POLY BUTADIENE RUBBER)
Polybutadiene rubber (BR, PBD) is one of the cheapest and largest-volume synthetic general-purpose elastomers which is sometimes used as a substitute for natural rubber (NR). The major use of cis polybutadiene rubber is in tires. It goes into side walls and treads.
SBR (STYRENE BUTADIENE RUBBER)
Styrene-butadiene or styrene-butadiene rubber (SBR) describe families of synthetic rubbers derived from styrene and butadiene. About 50% of car tires are made from various types of SBR.
ACETIC ACID
Acetic acid is the second simplest carboxylic acid (after formic acid). It is an important chemical reagent and industrial chemical, used primarily in the production of cellulose acetate for photographic film, polyvinyl acetate for wood glue, and synthetic fibres and fabrics.
LIGHT PARAFFIN WAX
Paraffin wax, obtained after the refinement of crude oil, is available for use by customers after the application of industry specific special treatments based on the requirements of the customers. Paraffin wax are mainly used in Candle production, in the wood sector, rubber, plastics, construction and paper.
NORMAL PARAFFIN (NP)
Normal Paraffin with carbon range of C10 to C13 is extensively used to produce Linear Alkyl Benzene. It also has various industrial applications in producing fatty acids to be used in surfactants and specific solvents required in paint and resin industries.
CAUSTIC SODA FLAKE (Na0H) 98%
Caustic soda flakes is majorly used in textiles processing, soap and detergent,paper and pulp industry. It is also used as an intermediate for wide variety of organic chemicals such as dyes, pigments, agrochemicals and variety of inorganic chemicals such as sulphites, phosphites etc.
LIQUID CAUSTIC SODA (SODIUM HYDROXIDE)
Liquid Soda Flake (Sodium Hydroxide) colorless and odorless liquid. Easily soluble
in cold water.It uses electrolysis method which results in pure liquid caustic soda
and free of metal impurities. It is marketed as liquid with 30%-33% and 48%-50%
according to ISIRI 364 standard.